Red Fabric Woes

With Christmas right around the corner, I thought I would gather all of my red/cream vintage blocks to see what I could make from them.   I have seven 9 patch blocks and 2 larger ones that I thought could somehow be worked into a lap quilt.  

First of all, though, I wanted to see if the red fabrics were colorfast.

I began by pressing them with the iron set on "cotton".  Unfortunately, like other vintage red fabrics that I've tried to use, the color transferred to my ironing board cover/press cloth.  

I really wanted to work with these blocks, so I decided to try to set the color.  A strong vinegar/cold water solution was the first thing I tried. The blocks were soaked in that for several hours.  While soaking, some color came out in the water, but did not transfer to the cream fabrics.  The vinegar solution was rinsed from the blocks under clear, cold water.  I noticed that the water was still running red/pink.  

What next?  I made a strong solution of salt/cold water.  Again, the blocks were soaked in this for several hours.  When rinsed, the water seemed clearer, so the blocks were laid out flat on a towel to dry.

After all of the soaking and drying, the blocks were a bit wrinkled.  So they were pressed with the iron set on "cotton".   To my dismay, still a bit of color transferred to my white press cloth.  

I am really curious as to why the red fabrics do this.  I have tried to research the fabric dying techniques of the last quarter of the 19th century by consulting one of the books in my "library"--Clues in the Calico.  I could find nothing there.  I tried an online search for an answer.  No luck, but someone else had had the same issue several years ago and her query had not been answered.  I even sent emails to vintage fabric experts, Xenia Cord and Barbara Brackman .  Xenia replied that she has had the same thing happen, and is pretty sure that synthetic dyes were used for red fabrics in that time period.  She didn't give any solutions to the problem, however. 

I decided to just put the blocks back in my stash for now.  I did not want to spend time on a project that may give me problems in the end because of red fabric "run".  

It didn't take me long to begin another vintage block project--it's in the works!   

Wonky Wrench Blocks

To my way of thinking, it is a challenge to try to fit random blocks together into a quilt top.  It is usually easier to work with a set of similar, coordinated blocks. 

But this was not necessarily the case with a group of 6 churn dash style blocks.  (This block design is more appropriately called "Wrench".  Unlike the true Churn Dash, the center units of the block are smaller than the corner 1/2 square triangle units.)  These blocks date from the late 1800s, and were somewhat "wonky" to start.  So how was I going to deal with the "wonkiness"? 

Several years ago I had used a technique to frame blocks that made the blocks tip one way and another.  Perhaps bordering the blocks this way would disguise the crookedness and slight size difference.  

I found the instructions that I had followed in the past*, and using my favorite brown/black fabric, bordered the blocks.  Three tipped to the right, and three to the left.  The blocks were squared to 9 1/2". 

 

My next decision was whether to set them right next to each other or to use a light sashing strip between the blocks.  Each block would show off better with sashing between.  But print fabric or plain?  The print seemed to be too busy with the prints in the blocks, so 2" strips of muslin were cut for sashing and 2" squares of the black/brown fabric for cornerstones.

 

The sashing and cornerstones were continued around the outside of the blocks to border them.  Once the piece is quilted, I will bind it with the brown/black fabric to finish it off.  

 

This small quilt top measures ~23" x 33 1/2".  It's the kind of quilt that I like to drape over the back of a chair, and I have the perfect spot in mind.  :)

*The instructions I followed to border my blocks came from an old issue of Quick Quilts (vol. 13).  The article was titled "Twist and Turn Sets".   I discovered that the technique has been updated and improved.  Check out NO WASTE WONKY FRAMED BLOCKS  on YouTube.  https://www.youtube.com/watch?v=kPpHJrUXCSk  It's a fun and unique way to set quilt blocks!

 

 

Preservation

 My collection of vintage quilt blocks is sorted first by "period", then by size of the blocks.  My goal in using the blocks is to basically preserve the wonderful fabrics from which they were made.  

I recently worked with a set of small blocks, measuring ~6",  pieced from fabrics dating back to the late 1800s.  With the exception of one block, they are 9-patches.  (In order to have enough blocks to make a lap-size quilt, I included a Bear's Paw of the same size.) 

The blocks were examined closely before working with them.  They had been hand-pieced and the stitching was still intact and seam allowances were decent.  There were a few spots on the blocks, most of which were not really noticeable.  The Bear's Paw block had the darkest spots--it was gently washed in a solution of Dawn and cold water.  The spots really didn't go away, but the block was definitely cleaner. When I found small holes in two of the blocks, the "holey" squares were replaced with squares of reproduction fabric.  Once that was done, all of the blocks were ready to use.

Some of the blocks were very wonky so I decided to create new square-in-square blocks with all of them.  Half squares were cut from 6" squares of background fabric and stitched to the sides of the blocks.  Once pressed, the new blocks were squared up to 9".  

Should the blocks be set side by side?  Doing so would make the wonkiness more obvious to my way of thinking.  It would be better to sash the blocks.

 

I chose a brown/black print with which to sash the blocks.  Each block would be framed and  could stand alone.  The sashing strips were cut  2 1/2" wide.  But what fabric should be used for the cornerstones?  If cut from the sashing fabric, they would not call attention to the shape of the 9-patch block and would truly frame each one. 

 

A 2 1/2" wide border was added to frame the whole piece.  The finished lap quilt top measures ~44" square, and the fabrics are nicely preserved!

 

Squares Squared

While browsing in an antique shop a while ago, a set of simple Square in Square quilt blocks caught my eye.  The fabrics used in them are those that I love, from the late 1800's and early 1900's, so I had to bring them home.  

Upon closer inspection, the blocks had been carefully hand-pieced.  And the maker was a true "scrap" quilter!  Several of the blocks contain lots of fabrics pieced together to create the needed size and shapes for the block.  :)  

A few of the blocks contain small stains but I ignored those as I was working with these blocks.  I will freshen up the entire piece once it is quilted.  

The blocks were squared up to 7", a size that worked for all but one of the blocks.  I then had 16 blocks with which to work--they could be set 4 blocks x 4 blocks. 

I wanted a color "softer" than solid black for the sashing and border strips.  Although it is not a reproduction fabric, a brown/black print from my stash was just what I was looking for.  The sashing strips were cut 2" wide.  

Among my collection of vintage fabrics was a bag of shirting squares--same era, so perfect for my cornerstones!  Because many of these squares are age-spotted, it took some sorting to find nine squares that were free of spots/stains.  Those were trimmed to 2" square.

While thinking about the border for this small quilt, I had the idea to make Square in Square blocks from the shirting squares for the border corners. I found four more "clean" squares, trimmed them to 2 1/4" and made the four corner blocks.  The size of those blocks then determined the width of the border for the quilt--3" raw.  The finished small quilt top measures ~35" square.

These vintage blocks are now preserved in a way that I will enjoy looking at them.  The next decision--How should it be quilted? 

 

A "Circa" 30s Challenge

 From my collection of vintage blocks, I chose nine that seemed to have been made from 30s era fabrics. The basic challenge was to put them together to create a lap-sized quilt.

One block was ready to use--a beautifully hand-pieced and hand appliqued block* that I trimmed to 14 1/2" square.  This would be my standard...all other blocks would be made to measure 14 1/2" square. 

A Grandmother's Flower Garden block was missing two outer hexagons.  A template was made from the existing hexagons in the block; two hexagons were cut from Aunt Grace green fabrics (which coordinated perfectly); and the two hexagons were hand pieced in place to complete the block.  It was then appliqued to a 14 1/2" square of muslin. 
 

An "improved" Dresden Plate block was also appliqued to a background muslin square.  This block was probably someone's sample block because the name of it is written on one of the solid blue pieces.  :)

The other block that was appliqued to a background square was a small hexagon piece.  It looked a little lonely when appliqued to a 14 1/2" square.  I brainstormed ideas for some block corners, but came up with none.  Three of the other blocks chosen for this project were small blocks, so I decided that this one would also be small.  The 4 small blocks would work well in a 9-patch setting for the quilt top. 
 

Two scottie blocks posed their own challenges.  First of all, they were very soiled.  Experts frown on pre-washing vintage textiles, but these blocks seemed to be well-stitched and would not be put through a washing machine cycle.  I filled a small dishpan with cold water and added a drop of Dawn.  I hand-swished the blocks in the water and then let them soak for a while.  I was amazed at how dirty the water was!  After the blocks were rinsed thoroughly, excess water was squeezed out and the blocks were laid flat on a towel to dry.  Not all of the stains are gone, but the blocks are definitely fresher! 

The other issue with these blocks was that the applique was done "on point", and the blocks measured 12 1/2".  Corners would have to be added to bring the blocks to square with the scotties pointing sideways.  Just adding corners to the existing blocks would make them measure 18" square. 

To not waste a lot of new corner fabric, the blocks were trimmed horizontally and vertically to 14 1/2", removing the original top, bottom and side corners.  Tea-dyed muslin was chosen for the new corners of each block...it just looked better than lighter muslin on these blocks.  But now the corners looked too plain!  With two strands of black embroidery floss, a running stitch was done along the seams, to match the stitching on the scottie dogs.  

The larger blocks were now ready.  The four smaller blocks would be bordered out to bring them to size, but with what color?  Several solids were auditioned, and a pastel green solid fabric was chosen --it complemented all of the blocks without overshadowing any of them. 

This challenge came together beautifully.  Nine 30s-era blocks are preserved in a 42" square quilt top.  Once it is quilted, it will be bound with the pastel green fabric.  

*I like the design of this scrappy block so much that I photocopied a large portion of it.  I can now make a pattern and templates from that.  :) 

Simply Vintage Squares

Over the past 30 years or so, I've browsed antique shops for vintage fabrics, quilt blocks and quilt tops, specifically those from the 1930s or from the turn of the century (late 1800s to early 1900s).  Those that caught my attention and seemed like a "good deal" came home with me. I didn't realize how much my collection had grown until I recently started sorting.  

I found more than 30 blocks that were either 4-patch or 9-patch, made from early 1900s fabrics.  Since what they had in common was that they were all made from squares, I envisioned that they could all work together in a small quilt.  

I first examined each block for bad stains, narrow seam allowances, holes or very thin fabric.  If they had a serious "issue", they were set aside. Minor issues were not a problem.  Most of the blocks had been hand pieced, and only a few of them required a bit of re-stitching.  Some of the blocks have slight stains, but I did not try to wash any blocks before using.  In her book, Twisted, Mary Kerr suggests waiting until a piece is quilted to take care of minor stains and discolorations.  The vintage fabrics and stitching are very fragile and lots of handling will make the blocks fall apart.  The blocks that I chose to use were not that dirty...had they been, I would have gently washed them before working with them. 

Thirty blocks were usable:  seven 9-patch blocks that measured ~10" square, thirteen 9-patch blocks that measured ~7" square, and ten 4-patch blocks that measured ~7" square, enough blocks to be set 5 x 6.  To make the blocks all the same size, the smaller ones were surrounded by 2 1/2" strips of muslin, then trimmed to fit the 10" blocks.  

Once I decided on my layout, I began to piece the quilt top; first the blocks into rows, then the rows together.  While pressing the seams, I noticed that one of the red fabrics in a large 9-patch block was "bleeding" onto the muslin surround. 

Out came the seam ripper, to remove the 9-patch block to find out what was happening. 

I immersed the block in cold water to see how badly it would bleed. 

Much to my surprise, it DID NOT bleed when immersed in the cold water.  I wrung out the block and laid it flat to dry on a white towel.  NO bleeding while drying!!!  

Once dry, the block was placed on a pressing cloth and pressed with a hot iron.  Here's the press cloth after the block was removed.  Very strange, indeed!!! I have worked with red fabrics that bled upon becoming wet, but never red fabrics that reacted to the heat of an iron.

Needless to say, this block was not put back into the quilt top.  I had one large block that I'd set aside because several of the squares in it had bad stains.  That block was taken apart and the stained squares were replaced with squares of vintage fabric from my stash.  The completed block was then inserted into the quilt top where the red block had been.  

The strips of muslin where the red dye had transferred were also replaced (my seam ripper got a real workout!).  What was supposed to be a quick and simple quilt top made of vintage squares became a more labor intensive project!

Here's the finished quilt top...Simply Vintage Squares. ~ 48" x  58"

There are more vintage blocks in my collection that contain red fabrics. Before I use these blocks in a project, I now know to "test" the reds before using the blocks so there will be no surprises.  Lesson learned!!! 

It Just Kept Growing!

The idea to make a row quilt came to me as I looked at my collection of vintage fabric scraps and blocks from the 1930s and 40s.  

Fat Quarter Shop has been posting weekly blocks for their "Sewcialites" quilt and one of those designs reminded me of patchwork from the 30s.  So I began there, making 6" blocks from a variety of vintage fabric pieces.  Seven of them, pieced together side by side, resulted in a 42" wide row...perfect for the width of the muslin that I wanted to use.   

I had a few star blocks that a friend had made from some of HER vintage fabrics.  They just happened to measure 6 1/2"...I pieced some from MY vintage fabrics to complete a row of them.  

There were some small 9-patch blocks in my collection.  After piecing more of them, I  decided that they would be more interesting on point.  

Corner triangles were drafted to add to seven Grandmother's Flower Garden blocks so that they would be "squared up" to piece into a row.  

Three arcs left from a Double Wedding Ring quilt that I had reassembled a number of years ago found their way into two rows, too.  I cut the arcs in half and appliqued them to strips of muslin.   

I have a shoe box full of small squares of 30s fabrics.  Some were squared up to 2 1/2" and made into 9-patch blocks.  Others were used to make scrappy pinwheels and 1/2 square triangle blocks.  

 

 

 

 

 

It wouldn't be a 30s quilt without Scotty dogs.  After they were appliqued in place, they were top-stitched with black embroidery floss.  

And what about butterflies?  These were appliqued in place, then bodies were added with chain stitching using 6 strands of black floss.  The blanket stitching around the bodies was done with 1 strand of black floss.  

I had to include a row of bow-tie blocks, too!!!  

Each row was adjusted to measure 42 1/2" wide.  Then all of these rows were pieced together, with spacers between the rows.  The quilt now measured 72" long.  But at this point, it was only 42" wide--very long and skinny.  Time for side borders.  These were cut 5 1/2" wide.  And because I wanted Sunbonnets in this quilt somewhere, a couple of them were appliqued to this border.  

The addition of the side borders brought the width to about 52" wide.  This still seemed too narrow.  I decided to add another 5" muslin border to each side.  But just stitching those to each side would look like an "oops" to me.  To solve that problem, vintage fabric strips were pieced together and stitched between the muslin borders as spacers.  Now the quilt measures 72" x 62" and fits nicely on a twin bed!   I really like the way it grew!  :)

Fans Galore!!!

Many years ago an industrious quilter used her scrap bag and a cardboard template to cut out LOTS of wedges.  

The wedges were cut the exact size of the template.  They were then hand-pieced together with a narrow seam allowance.  

The notes on the template say to piece 7 of the wedges together to form a fan.  LOTS of wedges were pieced into fans containing 7 wedges.  I have almost 100 of them!

I do not remember how I obtained this newspaper bag filled with fans, but I think I know why this project was abandoned by the quilter...the fans will not fit neatly onto a square background block.

She even pieced 8 wedges together for a fan and tried to make that into a square block.  No luck with that, either.

 

The fabrics are an interesting mixture of "eras"...mostly from the 50s and 60s, and very colorful.  If they would not work into a fan quilt, what else could be done with them?

As a child, I loved paper dolls.  I was always designing new dresses for them and I remember telling my grandma that I was going to be a dress designer when I grew up.  The more I looked at these fans, the more I thought they looked like "skirts".    

I designed a simple bodice that would fit the small arc of the fans.  I selected a variety of vintage solid fabrics from my collection and chose a number of fans to work with.  Each fan was machine stitched 1/4" from the raw edge, all the way around, not only to hold the seams in place, but also to give a guideline for needleturn applique.

The skirt was appliqued to the bottom edge of the bodice; the entire piece centered on a
9 1/2" square of "dotted swiss" white on white cotton fabric, and appliqued in place. 

This is a crazy-quilt type of project because each bodice is to be "fancied" with embroidery and beads, buttons, etc.  I have my crazy quilt stitch books out for ideas, but it takes time to ponder what to do on each dress.  Twelve blocks have been appliqued so far; 3 have been "fancied".  This is definitely a Project In Progress!

 

 

 

 

After I make at least 12 more blocks for my ' "Fan"cy Dresses' quilt, LOTS of fans will remain.  Perhaps they can be used for a version of Snake Trail?   Time will tell...